Schedules list as a table with enable, run now, edit, duplicate, delete and
view runs; built-ins only enable, retime and run. The runs page links each
run's tasks through its capture's dispatches. The Start node gains a Schedule
trigger that picks or creates a schedule and binds the schedule source to the
workflow. Times show in a per-browser display zone set under Appearance; the
cron time zone and run retention are edited on the Schedules page.
archied, archie-ui and the tool gateway re-read the stored policies on a 30s
ticker, so a forbid written seconds earlier did not stop a run. One
instance-wide revision now moves inside the transaction of every policy write,
and a decision reads it first and rebuilds the engine only when it moved.
A version read that fails, or a policy list that fails after a bump, refuses
with ErrChainUnavailable instead of standing on the last chain, so three call
sites now treat unavailable as availability rather than denial: dispatch leaves
the capture for the next cycle, a task start parks transient, and the tool
gateway reports the tool as unavailable.
Replace the service bearer tokens with [tls] ca_file and cert_dir. Caller
identity comes from the verified certificate, not metadata. Without TLS,
services listen and dial on loopback only. Task containers get only the CA
and keep their grant.
* feat(archied): read-only run-scoped sandbox view over the harness contract
Serve RunTarget: the daemon resolves a running task and attempt to its Kit
container and follows its output, refusing a finished or unknown task with a
stated reason. The dashboard adds a Sandbox tab behind the task log's read
authority. Takeover stays out of scope until the sod1 authority is wired.
* fix(archied): scope and close sandbox views correctly
Forward harness activity into container output, bind containers and dashboard views to their attempt, enforce the asserted org, and report unavailable dependencies and interrupted streams accurately.
Refs: archie-core-qi91, archie-core-252tj
* feat(state): durable operator alerts owned by the State Store
Alerts dedup on org+kind+subject, resolve themselves when a condition
clears, and are raised, resolved, dismissed and listed through the state
contract. Task transitions raise needs-human and failed alerts in the same
transaction; the store checks service health and prunes closed alerts.
Each raise and resolve queues a webhook delivery whose attempts are kept.
* feat(notify): deliver operator alerts to the webhook; raise config and release alerts
notify.webhook now receives raised and resolved alerts above a severity
threshold with HMAC-signed payloads, bounded retry and every attempt recorded
on the alert. archied raises model alias, provider and credential-binding
alerts from the effective configuration, an update alert from the release
channel, and a credential-rejected alert from the egress resolver. The
dashboard API lists and dismisses the caller's org's alerts.
* feat(ui): alert bell in the top bar and webhook alert settings
The bell lists the org's open alerts by severity with dismiss and a link per
alert, and refreshes from the event stream. The task settings page gains the
webhook severity threshold and signing secret. ui/dist rebuilt.
* fix(postgres): scope OpenPRs to the caller's org
A principal-carrying caller read every org's pr_open tasks. The query now
honours the request scope; the daemon's unscoped review scan still sees all
orgs.
Issue: archie-core-kgxw.23
* fix(statestore): serve task logs only to the task's org
ReadTaskLog and StreamTaskLogContent took a task ID and read the file with
no org check. The State Store's task-log reader now confirms the task is
visible under the caller's scope first; unscoped services read as before.
Issue: archie-core-kgxw.24
* fix(postgres): scope ListPolicies to the caller's org
Every org's policy text reached any principal-carrying caller. A scoped read
now sees its own org's policies, plus instance policies when scoped to the
system org. The engines and the lockout guard decide for every org, so they
read the full chain unscoped: the dashboard engine loads without the
request's principal and the guard lifts the caller's scope.
Issue: archie-core-kgxw.25
* fix(postgres): scope identity reads to the caller's org
ListIdentities and GetIdentity (and its alias fallback) returned every
identity to any caller. A caller scoped to an org now sees only that org's
members and assigned agents; the system org and unscoped services still see
the whole instance.
Issue: archie-core-kgxw.26
* fix(postgres): hide instance status from other orgs
ListPresence, ListChannelStatus, ListApplyStatus and GetConfigSnapshot
answered any org principal with instance-wide state. They now return nothing
unless the request is unscoped or scoped to the system org. The dashboard
reads the published config as itself, since its handlers project it for
callers of every org.
Issue: archie-core-kgxw.27
* feat(postgres): assign new agents an org and role at creation
A bot or service account created through the API served no org until the
next State Store boot granted it one. Create now assigns it to the org the
request acts in with the developer role in the same transaction, so it is
authorized immediately.
Issue: archie-core-kgxw.14
* feat(edastore): create event records in a chosen workspace
Sources are created in a workspace of the caller's org, the default one when
none is named; event types and bindings take their source's workspace and
mappings their event type's, the same rule the org backfill applied. The
binding, mapping and event type contracts carry the workspace, the four list
endpoints accept ?workspace=, and the Events page has a workspace selector
that filters every step and picks where a new source goes.
Issue: archie-core-kgxw.11
* feat(webui): authorize a record in its workspace
The API built every access request with no workspace, so workspace
policies and per-workspace roles never applied. A request naming a source,
binding, mapping, event type or task now reads the record's workspace under
the caller's scope and authorizes in it; tasks carry their workspace on the
State Store contract for this.
Issue: archie-core-kgxw.9
* feat(access): expose workspace environment to policies
Policies can test resource.workspace.environment. The workspace attribute
is the workspace entity, which carries its environment; the principal
brings its org's workspaces from the State Store, so the dashboard and the
daemon's run checks describe a resource's workspace without another lookup,
and the daemon now authorizes runs in the task's or binding's workspace.
Issue: archie-core-kgxw.10
* fix(webui): ask read_secret when a source secret is read
Rotating a source's secret returns its value, but the route asked update,
which every developer holds, so no policy could narrow who reads a secret.
It now asks read_secret on the secret, which the shipped roles give admins
and an object policy can narrow further.
Issue: archie-core-kgxw.17
* refactor(org): delete the unused upgrade-incomplete sentinel
Nothing returns org.ErrUpgradeIncomplete: the State Store finishes the org
upgrade before it serves.
Issue: archie-core-kgxw.18
archied update install verifies the release zip, checks every binary
reports the release, pulls the agent image by digest, backs up the
database in-process and stages the binaries before handing off to
archied update watchdog in its own process. The watchdog restarts units
in release order, requires archied healthy for 120s and otherwise rolls
back binaries and image policy, restoring the database only when a
migration ran. Boot recovery resumes the frozen watchdog.
Deletes scripts/archie-update-install, scripts/archie-update-watchdog,
the updater's --from-source and --auto, CommandInstaller,
ScriptInstaller and the update-image and update-topology subcommands.
POST /api/orgs/{id}/members binds a person by subject, or by email as a
placeholder. The first sign-in whose provider vouches for that email
claims it: the State Store moves the binding onto the provider's subject
in one statement, so a second account with the same address finds
nothing to claim and later sign-ins rest on the subject alone.
Webhook intake answers 503 and counts no refusal while the chain loads.
The readiness probe reads the chain on every check. The UI never exits on
a first-load failure. An invalid instance policy closes the instance but
lets an instance admin repair policies. Outage pages are 503, and the
health detail names the unloaded chain.
The dashboard serves plain HTTP, so a non-loopback bind carries the
session cookie and provider token in clear unless TLS terminates in front.
Warn at startup unless the operator declares a proxy with
[web].trust_forwarded_headers, and record the choice in deployments/README
where the dashboard is deployed. Point the non-loopback token error at
that surviving doc, not the deleted UI-boundary PRD.
A State Store that was unreachable at startup left the access chain nil,
and authorize treated nil as no chain at all: every request passed the
credential check, no principal or org reached the context, the State Store
defaulted each call to org-sys, and the instance-only surfaces were served.
The dashboard stayed open until a restart.
Build a chain with no engine when the first load is Unavailable; it refuses
every request with 503 (or the notice page for a browser) until the first
load succeeds, and Run keeps retrying so the dashboard recovers without a
restart. A denial is not recorded, because nothing was evaluated.
The dashboard's setup terminal was a 503: it had a WebSocket route, an
authorizer and an xterm.js surface, but nothing owned a container. The
daemon owns containers, so the session contract lands there and the
dashboard consumes it over a new gRPC contract.
One session concept, two targets. A setup session is addressed by Kit
profile and is ephemeral; a run session (archie-core-qi91) is addressed by
task and attempt and is bounded by the task. This slice serves setup and
answers Unimplemented for run.
The contract, the authorisation, the lifetime and the egress phase are
settled in docs/prds/external-agent-harness.md, "Session contract". The
short version: the daemon serves harness.v1.HarnessService; the dashboard
authorizes the operator as an update on the secret and then dials the
daemon with the harness service token, required even on loopback because a
session is a shell holding an org's credential; the setup container runs
no worker, mounts no worktree, holds a keepalive, and carries an empty
container environment. Install hooks run at the install phase and the
session enters runtime before the shell, so a runtime-phase credential's
token endpoint is the one the proxy intercepts.
Capture is gated by the egress proxy on a granted service, and a setup
session has no task, so the daemon registers a session grant: the
session's proxy token resolves to the org's bindings for the Kit's
declared services. The real token never enters the container: the token
endpoint response is sentinelized and stored as the org's harness secret.
Every teardown path releases the pool slot, revokes the egress session and
the grant, removes the sandbox network, and removes the session's volumes.
The listener requires HARNESS_TOKEN and stops with a 10s grace before
Stop, so an open session cannot hold shutdown to the watchdog leash.
Add ListSkills, CuratorHealth and ReloadChannel to the gateway chat contract. The
Gateway process supplies its live skill catalogue and curator registry through a
Catalog seam; archie-ui adapts the RPCs to the webui view interfaces and wires
them in compose. The Gateway hosts no channels, so ReloadChannel answers
Unavailable here; the channel request surface is archie-core-np7l.
Remove PRD/doc paths, bead IDs, phase notes and deleted-test references
from comments; drop test-only hooks left by the test deletion. Includes
in-progress archied bootstrap, gateway and query changes.
A retry now carries the operator's worktree choice (refresh onto the base
branch or continue the work already pushed on the task branch) from the
dashboard through the task action to the daemon dispatch, and persists it
on the task row so it survives a reload. The daemon resolves the mode from
the task, never from the workflow; BeginRemediation records continue
explicitly so a remediation still resumes its pull request branch.
The harness page lists each credential binding with its captured OAuth
state (expiry, scopes, capture time; never the tokens), and the setup
terminal route upgrades to a WebSocket and bridges it to a harness
session. The session is a narrow webui-owned HarnessTerminal seam: the
container, sandbox network and egress path belong to the daemon, so the
dashboard process cannot implement it and answers 503 until a transport
is wired (archie-core-egkf.7). Opening the terminal authorizes as the
update action on the secret, per the PRD.
Decision 1 of docs/prds/pr-review-operator-response.md: the dashboard's
POST /api/tasks/{id}/action is the authoritative surface, chat's /approve
is a shortcut that posts every offered finding, and both reach the same
Service.Apply so one operator intent cannot be recorded as two decisions.
The action body now carries instructions (required by rereview) and the
finding keys an approve posts. taskactions.Service answers an offer
through the guarded RespondReviewGate write: approve records the
selection on the offer, rereview records the instructions, increments the
round and clears the offer, and a rereview with no instructions, with no
offer, or at the cap is refused as a conflict with nothing written. Chat
reaches the same service: chatTaskControllerAdapter.ApproveChatTask
delegates to b.taskActions() instead of its own requeue, which is what
removed the handler's hardcoded implement handoff -- feasibility's deliver
stage now names implement on the task before it waits, the invariant the
handler needs.
The payload crosses every hop it must: the NATS action request, the
gateway.v1 gRPC contract (regenerated), the LocalChatAdapter, and the
webui handler, which answers 400 for a rereview without instructions and
409 for the cap. A rereview event kind names its actor the way the
approval and rejection trios do.
taskactions.Task gains review_gate and rereview_rounds, and the two
surfaces' tests assert they agree.
A workflow-enablement control-plane resource lists, per org, the workflows
that org has disabled. A binding targeting a disabled workflow is skipped at
dispatch like an unarmed one, is refused on save, and is flagged on the
binding list; the workflows page toggles it. Bindings now carry the org_id
column they already had in storage, over the State Store wire too.
Org-owned workflow definitions are deferred to a follow-up bead: they need
the caller's org, which the access chain resolves.
review_pr self-omitted since d73e0748 deleted the synchronous reviewer it
called. It is rebuilt on the task enqueue path everything else uses: the
tool resolves the identity's configured repo, then queues a pr-review task
naming the pull request through the workflow's declared pr_number input,
which is the same generic input mechanism a watched-repos binding uses.
That input has to reach the store with the task, so
EnqueueChatTaskRequest gains inputs_json and the tasks insert writes the
inputs column directly. StampTaskBinding no longer writes it: the insert is
now the column's only writer, and a chat task must not acquire binding
provenance just to carry an input.
ChatPRReviewer, its result shape and the reviewer wiring are deleted with
the path they served.
docs/prds/execution-tree-state-machine.md: step_executions (0017) is now the
durable per-step record; the dashboard's run detail (GET /api/tasks/{id}/
attempts) still folded stage_start/stage_finish events into a rail by hand,
and tasks.stage duplicated what StartStep/FinishStep already record properly.
Added the missing read:
- ListSteps(execution_id, attempt) -- attempt 0 lists every attempt of the
execution, oldest first, so the rail renders every attempt from one call.
New storecontract.StepReader (separate from StepRecorder: this is a
dashboard/API/dispatch action per the PRD's wire contract, never
task-scoped-grant callable), postgresdb.ListStepExecutions, staterpc
client/server/values.go plumbing, wired through state_store.go's Deps and
archieui/compose.go's Server.Steps the same optional-capability pattern
every other dashboard read uses.
- internal/webui/api_tasks_attempts.go: stageViewsFromSteps replaces
foldStages/finishStage/stageOutcome. Attempt bounds, event_count and which
attempt numbers exist stay sourced from events (an attempt can carry
events -- agent calls -- with no step), only the stage list itself moves.
The wire JSON contract is unchanged, so no frontend change was needed;
`task ui` confirms ui/dist still matches a fresh build.
- A running step past the task's own current attempt reads interrupted, not
running: RecoverStale (archie-core, still open per #1214) is what corrects
a crashed run's stale "running" row, and until it does this is the honest
read rather than trusting a row that may be stale.
Dropped tasks.stage and every reader, no fallback:
- Migration 0018 drops the column; tasks.sql's INSERT/UPDATE/RETURNING lists
and the sqlc-generated code no longer carry it.
- workflow.Task.Stage is gone; workflow.Run's in-flight "which stage is this"
bookkeeping moves to TaskContext.Stage (execution-time only, never
persisted -- park/finish's event tagging is its only reader).
- pb.Task.stage (wire field 10) is `[deprecated = true]`, not deleted (never
reuse a field number); staterpc's taskProto/taskValue no longer map it.
- taskactions.Task.Stage and the retry event's "previous_stage" data field
are gone: the operator-action package had no reader for the column beyond
echoing it.
- The chat /tasks command's per-task "workflow/stage" display drops to
workflow-only (ChatTaskSummary.Stage removed, workflowStage() deleted):
it was a genuine reader with no replacement in scope for this change.
Read the archie-web-ui skill and the state-store/daemon docs/development
pages first, per instruction. Stayed out of cancel/stop code throughout
(Pi's concurrent CancelExecution work); the only shared files touched
(workflow.go, daemon-adjacent SQL) got the smallest possible diff.