Commit Graph
21 Commits
Author SHA1 Message Date
sam 29b074ef77 refactor(archied): move the update relay to the process that owns updates
The dashboard's Run read the watchdog's phase-2 report off local disk and
put it on the activity stream. That is a host-local file read in the process
that is moving off the host: the watchdog restarts archied and leaves its
verdict beside archied, so archied is what can read it.

The daemon now polls and relays it, publishing the same event through the
same bus, so it persists with every other event and reaches whichever
dashboard is watching. The event builder moves to releaseupdate, which owns
Report and its verification; the dashboard keeps only what it needs to tell
an installer where to write.

The startup poll stays: the watchdog writes its result only once the process
answers /healthz, so a single read at boot can always miss the report
describing that very boot.

persistAndBroadcastEvents takes the daemon context and detaches it for the
insert, which is what it always did with context.Background() -- the last
events of a run are the ones an operator reads afterwards.
2026-09-09 23:55:20 +10:00
sam 1ffdedc62e feat(archied): serve the daemon's own health endpoint
The update watchdog verifies archied's restart, so archied has to be what
answers. It was probing the dashboard's /healthz, which belongs to the
dashboard: switch [web] off and nothing answers, and in the extracted UI
topology that endpoint reports a different process entirely, which would
confirm a release while the daemon it was meant to verify is down.

[health].listen (127.0.0.1:8485, defaulted, always on) serves /healthz,
/health and /health/detailed for the life of the process. Liveness answers
503 until the daemon reaches its run loop: the listener binds before the
subsystems do, so an unconditional 200 would tell the watchdog a half-booted
release came up. Failing to bind is fatal, because a daemon nothing can probe
gets every update rolled back. The State Store's readiness surface now shares
the listener plumbing, keeping its log and error text verbatim.

Closes archie-core-exbz, which asked which of two bad options to take when
the dashboard is off. Neither: the daemon owns its own liveness.

Also deletes TestInstallUpdateDetachesInstallerFromCallbackContext. It has
failed intermittently under load more than once, racing its fake bot server's
multipart parse against the cancellation it induces.
2026-09-09 23:29:11 +10:00
sam 41c99eda99 fix(update): probe the dashboard's real address after a self-update
The watchdog polled http://127.0.0.1:8420/healthz. Nothing binds 8420: the
daemon serves /healthz on [web].listen (127.0.0.1:8484 by default), so every
dashboard- or Telegram-initiated update waited out the 60s health timeout and
rolled back a release that had come up fine.

The daemon is the only process that knows which address it binds, so it now
derives the probe URL from its own config and hands it to the installer;
CommandInstaller exports ARCHIE_HEALTH_URL and the install script forwards it
into the watchdog unit, whose remaining default matches the dashboard's.

The suite never dialled the URL: every watchdog test faked curl as an
immediate failure, so only the unhealthy branch existed. One test now runs
the real curl against a real listener, and another pins the script default.
2026-09-09 23:29:11 +10:00
sam 9310fa5898 fix(releaseupdate): use context-aware database calls in tests 2026-09-05 21:14:28 +10:00
samcharles93 d6cec97de1 fix: baseline gate repair (go test ./... -count=1) 2026-09-05 08:24:10 +00:00
sam 2dd095c8a7 fix(build): clear pre-existing task check gate blockers (#719)
Baseline `task check` failed on a clean main checkout, blocking unrelated
in-flight work. Fixes only those pre-existing failures:

- bootstrap.go: extract wireWebStoreSurfaces from setupObservability
  (cyclop 16 > 15) and startEmbeddedNATS from connectNATS (nestif).
- telegram_setup_test.go: os.Setenv -> t.Setenv (usetesting).
- install_script_test.go: exec.Command -> exec.CommandContext with
  t.Context() (noctx).
- Taskfile: add a ui:deps install step shared by `ui` and `test:ui`.
  ui/node_modules is gitignored and nothing in the gate installed it, so
  `task test:ui` died on a missing jsdom rather than a real test failure.
- shutdown_watchdog_test.go: `go fix` output adopted verbatim.

Refs bead archie-core-14cs.
2026-09-05 13:37:34 +10:00
sam febc9f075a fix(update): make daemon rollback schema-safe (#704) 2026-09-03 14:53:03 +10:00
sam 1425050506 fix(build): stamp gatewayVersion/runtimeVersion in the right package
-X main.gatewayVersion/main.runtimeVersion targeted package main, but
those vars live in internal/app/archied (cmd/archied is a thin
wrapper). An -X target that doesn't exist is silently ignored by the
linker, so every archied binary this shipped -- task build, install.sh,
Dockerfile.archied, and the carina self-update script -- reported
"dev" instead of its real version. Point every one of those ldflags at
the actual package.

Also, while chasing the carina incident this surfaced:

- restart.go: /restart didn't check for an in-flight /update install.
  The install runs as archied's own child process, so a restart killed
  it mid-build (observed: "signal: terminated") instead of letting it
  finish or fail cleanly. Refuse the restart while updateInProgress.
- update.go / update_report.go: the "no version could be confirmed
  running" branch still opened with "Update complete", contradicting
  its own next clause. Reworded so an unverified outcome isn't
  reported as completion.
2026-09-02 00:00:32 +10:00
sam 6121ce3e1a fix(lint): noctx fixes and dead-code cleanup
- install_script_test.go: exec.Command -> exec.CommandContext (noctx)
- architecture_test.go, store_test.go: go fix removed now-unused
  inspectEngineFamilies/parsePackageFiles/stringPtr helpers.
2026-08-31 21:35:58 +10:00
sam a27fb5f36e fix(update): remove source checkout dependency
Dashboard-initiated updates also retain a configured Telegram restart-report route, while falling back to the web UI report when Telegram is unavailable.
2026-08-25 03:28:37 +10:00
sam 1f05dbb33c feat(deployment): default to managed NATS workers
Autonomous workflows now always hand a complete task to a scoped archie-agent container. Embedded NATS is the default and external NATS changes only broker placement; legacy agent and containers.enabled inputs decode for migration but cannot select an execution path. The daemon flushes task-event subscriptions before a worker can publish, and runtime updates snapshot and restore the configured worker image.
2026-08-24 14:56:57 +10:00
sam 6a8fa1a090 fix(update): pin builds to approved release tags
Build selected components from a temporary worktree at the exact approved tag commit instead of the moving branch tip. Validate release version inputs and require combined component tags to resolve to the same source commit.\n\nRefs #606
2026-08-23 16:28:30 +00:00
sam 2ff09193cd fix(update): install only approved components
Carry the revalidated update snapshot through the installer contract so the shell adapter receives an explicit per-component plan. Build, back up, install, and roll back only selected components, and pass the runtime release version into agent image builds.\n\nCovers gateway-only, runtime-only, combined, and no-op updates.\n\nRefs #606\nBead: archie-core-462t
2026-08-23 16:18:30 +00:00
sam 7b147a8a10 chore: apply gofumpt formatting 2026-08-23 15:49:40 +00:00
sam 25af279d7a feat(releaseupdate): enrich components with install type and reference
Component.Installed/Available come from an operator-owned external
check command, which reports what version exists but has no way to
know how THIS process/deployment actually installed it -- native
binary, container, or embedded process. Two sources for that already
exist and were previously unused for this: internal/installtype
(this process's own build-time stamp) and daemon.AgentStatus (an
archie-agent version observed at runtime, landed in the prior commit).

Add Component.InstallType/Reference and a Service.Enrich hook that
fills them in per component ID after the check command runs, without
overwriting whatever a check command already reported for an ID it
doesn't recognise. Wire the actual sources in cmd/archied via
componentInstallTypeEnricher: the daemon's own installtype.Type(),
the agent's most recently observed install type, and -- for NATS, a
third-party dependency this repo doesn't build -- "embedded" or
"external" (with its URL) read straight from [nats] configuration,
which is already the deployment profile's own record of how NATS is
run. This is wired into the single Service construction shared by
Telegram and the dashboard, so both surfaces get it for free.

Part 2/3 of archie-core-1786751948782-3-837a8fd0 point 4. Closes
archie-core-1786751948782-3-837a8fd0.2.
2026-08-23 23:28:52 +10:00
sam 2873cbba82 fix(update): verify an update took effect instead of trusting the report (#530)
A pending update report used to be relayed verbatim. It is entirely
self-reported: scripts/archie-update-watchdog decides "passed" from
`curl -sf $HEALTH_URL/healthz`, which only proves that *a* daemon is
answering, then copies the version the installer *intended*
(ARCHIE_UPDATE_INSTALLED_GATEWAY) into the report. If the new binary
never made it into service, the previous daemon answers the probe just
as happily, so the message read "Update complete: daemon 1.9.8 -> 1.9.0.
Health check passed - archie-core is healthy on the new version" about a
version that was not running. That shipped: /update reported success and
the next task hit the exact bug the update was meant to fix (#468).

Report.Verify now checks the claims against the versions components
report for *themselves* -- archied's compiled-in gatewayVersion, which no
installer can talk it out of -- and partitions every claimed component
into Confirmed, Drift or Unverified.

What changed in MEANING:

- A passed health check used to mean "the new version is running". It
  now means only "something answered"; the version claim is a separate,
  separately-checked assertion.
- "Update complete ... healthy on the new version" used to be the only
  success wording. There are now three outcomes, because collapsing them
  is how the false success happened: confirmed, unconfirmed ("I could
  not confirm which version is actually running"), and contradicted
  ("Update did NOT take effect").
- An unverifiable component is NOT a failing one. Absent, empty,
  "unknown" (the watchdog's own default) and "dev" (an unstamped build)
  all mean "we could not check", never "it is wrong" -- treating them as
  drift would turn healthy updates whose bookkeeping went missing into
  reported failures.

Verification covers the daemon only, deliberately. archied's compiled-in
runtimeVersion records what its own pipeline stamped, not what the agent
container runs, so vouching for the agent would be the same kind of
guess this change exists to remove. The agent is therefore Unverified on
every successful update, and the success message names it as unchecked
rather than letting the confirmed daemon silently vouch for it.

Drift detail is attached per component: one component can sit on the
version the update meant to replace while another is on some third
version, and a single explanatory sentence would state a falsehood about
one of them.

Regression tests were confirmed to fail against the pre-fix code,
reproducing the exact false-success string, and each new guard was
mutation-tested. The drift-ordering test's component count is
load-bearing and documented: Go rotates small maps rather than permuting
them, so 8 components let an unsorted implementation pass ~12% of the
time while 9 fails it outright.

Refs #522, #468
2026-08-21 21:42:48 +10:00
sam 7c409aadb5 feat(update): stream live progress and roll back failed updates automatically
The /update command went silent between "starting" and one final message,
gave no version summary, and required manual intervention on failure.

CommandInstaller now streams the installer script's stdout live instead of
buffering it, and parses a structured result (previous/installed versions,
per-component status) from a sentinel line. Because the reference install
script hands the daemon restart off to a detached systemd unit specifically
so restarting archied.service doesn't kill the process that requested the
update, the outcome is reported in two phases: the synchronous build/install
result comes back through Install() itself, and the post-restart health
check/rollback outcome is written by a new watchdog script and relayed by
whichever archied process boots next, via a small JSON handoff file cleared
once relayed.

Also fixes three defects an adversarial review pass found in the first
draft: the caller's request/handler context was passed straight into the
install child process, so a concurrent /restart or a browser disconnect
could SIGKILL it mid binary-copy; Telegram and the web dashboard each
tracked "install in progress" with their own private flag despite sharing
one Service, allowing two installs to race the same .prev backups; and the
watchdog reported rolled_back:true even when no backup existed to restore,
which would have told an operator to stand down while the daemon was still
broken.

internal/webui gains an unauthenticated /healthz the watchdog polls after
restarting archied.
2026-08-19 01:47:29 +10:00
sam 54be74ae89 feat(releaseupdate): stamp install type at build time, fail closed on unknown
/update could report success at the correct target version while the
archie-agent container running it never actually changed: the update
mechanism trusted the configured installer's exit code and reported
whatever version number the release claimed, with nothing verifying
the two agreed.

The first piece of the fix: a new internal/installtype package
reports how a binary was built for distribution (Type(), defaulting
to "unknown"), stamped once per release artifact via
"-ldflags -X .../installtype.buildType=<value>" rather than guessed
at runtime by probing the environment -- restic and Tailscale both
treat "which install shape is this" as a build-time decision for the
same reason: a probed signal is guessable, a compiled-in one is not.

releaseupdate.Service.Install now refuses to run the configured
Installer at all when InstallType is unset or installtype.Unknown, so
an unstamped or misconfigured build can no longer silently attempt an
update it has no way to know is even the right kind for how this
instance was deployed. Wired through every real archied build path so
the gate doesn't just exist in principle: Taskfile.yml's build task
(binary), Dockerfile.archied (container), and install.sh (binary) all
now stamp it; cmd/archied/telegram_setup.go wires
Service.InstallType from installtype.Type().

Configuration-page display of install type/version and post-update
verification against the actually-running reference (not just the
installer's reported version) remain open -- this lands the
correctness gate, not the full observability surface.

Refs #522
2026-08-15 10:34:46 +10:00
sam e10cbbc92c refactor: pre-cleanup. 2026-08-06 01:40:15 +10:00
sam 68ba3456ee feat(webui): chat from the dashboard
Brings the chat surface to the Web UI: /api/chat with its own handlers
and tests, a self-contained ui/src/chat feature folder, and the shared
plumbing to reach the same router Telegram uses.

Includes a dangerous-command approval path (internal/gateway/dangerous.go,
internal/webui/dangerous.go, and the Telegram counterpart) so /rollback
and /stop are gated the same way on both surfaces, persona handling for
web sessions, and release-update formatting split out of the Telegram
service so both can render it.

web_parity_test.go pins that the two surfaces expose the same commands.

Authored in a parallel session; committed here so it lands with the rest
rather than sitting uncommitted while other work builds on top of it.
task check passes with it in place.

Screenshots used while building are gitignored (*.png) rather than
committed, matching the call made on the earlier design reference.
2026-08-05 10:48:51 +10:00
sam bcca6f9c25 feat(telegram): add approved component updates 2026-07-27 13:02:11 +10:00