chore(beads): recover from v1.2.1 schema skew; move to a project-local Dolt

The accidental, untested beads v1.2.1 release migrated the schema from v53 to
v65 while the supported v1.2.2 binary expects v53, so bd refused to run. All
three databases on the shared server were affected, not just this one --
archie_core, ai_sdk and beads_global were each at v65.

Recovery per docs/RECOVERY-1.2.1.md (beads v1.2.2): rolled the schema cursor
back to v53 in each database and re-tracked the events table to restore
audit-event versioning. Issue data was not touched; 508 issues before and
after. Data the 1.2.1 release wrote into 1.2.x-only structures (work-lease
state, events-journal rows, provenance, storage_class markers) remains in the
database and is simply unused by the 1.1 line.

shared-server flips to false, so this project now runs its own Dolt server out
of .beads/dolt instead of sharing /home/sam/.beads/shared-server with ai_sdk
and beads_global. Note bd 1.2.2 has no "embeddeddolt" mode -- that layout
belongs to the older embedded builds; project-local server is the equivalent
today, and .beads/dolt is already gitignored.

Hooks were reinstalled: the installed set was still 1.2.1.

The rest of the config diff is bd reflowing the YAML indentation on write.
This commit is contained in:
sam committed 2026-08-21 23:54:42 +10:00
1 parent 1f581de428
commit 175b8560dd
6 files changed
+95 -227

No files matched your search

+10 -12
View File
@@ -54,17 +54,16 @@
# Disabled by default; enable only when an integration needs fresh .beads/issues.jsonl.
# Use relative paths under .beads/ for JSONL import/export filenames.
export:
auto: true
path: issues.jsonl
interval: 60s
# issues.jsonl is tracked (see .beads/.gitignore), so the export must be
# staged with the commit that triggers it. With git-add off, the 60s
# auto-export would leave a tracked file permanently dirty in git status
# and block rebases and checkouts until stashed.
git-add: true
auto: true
path: issues.jsonl
interval: 60s
# issues.jsonl is tracked (see .beads/.gitignore), so the export must be
# staged with the commit that triggers it. With git-add off, the 60s
# auto-export would leave a tracked file permanently dirty in git status
# and block rebases and checkouts until stashed.
git-add: true
import:
path: issues.jsonl
path: issues.jsonl
# Integration settings (access with 'bd config get/set')
# Non-secret keys (stored in the database):
# - jira.url, jira.project
@@ -74,10 +73,9 @@ import:
# Secret keys (stored in this file but prefer env vars to avoid git exposure):
# - linear.api_key → use LINEAR_API_KEY env var instead
# - github.token → use GITHUB_TOKEN env var instead
sync.remote: "git+https://github.com/samcharles93/archie-core.git"
dolt:
shared-server: true
shared-server: false
auto-commit: "on"
audit:
enabled: true
+17 -43
View File
@@ -1,59 +1,33 @@
#!/usr/bin/env sh
# --- BEGIN BEADS INTEGRATION v1.2.1 ---
# --- BEGIN BEADS INTEGRATION v1.2.2 ---
# This section is managed by beads. Do not remove these markers.
if command -v bd >/dev/null 2>&1; then
export BD_GIT_HOOK=1
_bd_timeout=${BEADS_HOOK_TIMEOUT:-300}
case "$_bd_timeout" in
*[!0-9]*|'') _bd_timeout_invalid=1 ;;
*[1-9]*) _bd_timeout_invalid=0 ;;
*) _bd_timeout_invalid=1 ;;
esac
if [ "$_bd_timeout_invalid" -eq 1 ]; then
echo >&2 "beads: invalid BEADS_HOOK_TIMEOUT; using 300 seconds"
_bd_timeout=300
fi
_bd_timeout_backend=none
_bd_timeout_command=
for _bd_timeout_candidate in timeout gtimeout; do
if command -v "$_bd_timeout_candidate" >/dev/null 2>&1; then
if _bd_timeout_version="$("$_bd_timeout_candidate" --version 2>/dev/null)"; then
case "$_bd_timeout_version" in
"timeout (GNU coreutils) "*) _bd_timeout_command=$_bd_timeout_candidate; break ;;
esac
fi
fi
done
if [ -n "$_bd_timeout_command" ]; then
_bd_timeout_backend=coreutils
if "$_bd_timeout_command" -- "$_bd_timeout" bd hooks run post-checkout "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=0
if command -v timeout >/dev/null 2>&1; then
timeout "$_bd_timeout" bd hooks run post-checkout "$@"
_bd_exit=$?
elif command -v gtimeout >/dev/null 2>&1; then
gtimeout "$_bd_timeout" bd hooks run post-checkout "$@"
_bd_exit=$?
elif command -v perl >/dev/null 2>&1; then
_bd_timeout_backend=perl
if perl -e 'alarm shift; exec @ARGV' -- "$_bd_timeout" bd hooks run post-checkout "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=1
perl -e 'alarm shift; exec @ARGV' "$_bd_timeout" bd hooks run post-checkout "$@"
_bd_exit=$?
else
echo >&2 "beads: hook 'post-checkout' running without timeout; install coreutils or perl to enable BEADS_HOOK_TIMEOUT"
if bd hooks run post-checkout "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
bd hooks run post-checkout "$@"
_bd_exit=$?
fi
if { [ "$_bd_timeout_backend" = coreutils ] && [ "$_bd_exit" -eq 124 ]; } || { [ "$_bd_timeout_backend" = perl ] && [ "$_bd_exit" -eq 142 ]; }; then
if [ $_bd_exit -eq 124 ] || { [ $_bd_used_perl -eq 1 ] && [ $_bd_exit -eq 142 ]; }; then
echo >&2 "beads: hook 'post-checkout' timed out after ${_bd_timeout}s — continuing without beads"
_bd_exit=0
fi
if [ "$_bd_exit" -eq 3 ]; then
if [ $_bd_exit -eq 3 ]; then
echo >&2 "beads: database not initialized — skipping hook 'post-checkout'"
_bd_exit=0
fi
if [ "$_bd_exit" -ne 0 ]; then exit "$_bd_exit"; fi
if [ $_bd_exit -ne 0 ]; then exit $_bd_exit; fi
fi
# --- END BEADS INTEGRATION v1.2.1 ---
# --- END BEADS INTEGRATION v1.2.2 ---
+17 -43
View File
@@ -1,59 +1,33 @@
#!/usr/bin/env sh
# --- BEGIN BEADS INTEGRATION v1.2.1 ---
# --- BEGIN BEADS INTEGRATION v1.2.2 ---
# This section is managed by beads. Do not remove these markers.
if command -v bd >/dev/null 2>&1; then
export BD_GIT_HOOK=1
_bd_timeout=${BEADS_HOOK_TIMEOUT:-300}
case "$_bd_timeout" in
*[!0-9]*|'') _bd_timeout_invalid=1 ;;
*[1-9]*) _bd_timeout_invalid=0 ;;
*) _bd_timeout_invalid=1 ;;
esac
if [ "$_bd_timeout_invalid" -eq 1 ]; then
echo >&2 "beads: invalid BEADS_HOOK_TIMEOUT; using 300 seconds"
_bd_timeout=300
fi
_bd_timeout_backend=none
_bd_timeout_command=
for _bd_timeout_candidate in timeout gtimeout; do
if command -v "$_bd_timeout_candidate" >/dev/null 2>&1; then
if _bd_timeout_version="$("$_bd_timeout_candidate" --version 2>/dev/null)"; then
case "$_bd_timeout_version" in
"timeout (GNU coreutils) "*) _bd_timeout_command=$_bd_timeout_candidate; break ;;
esac
fi
fi
done
if [ -n "$_bd_timeout_command" ]; then
_bd_timeout_backend=coreutils
if "$_bd_timeout_command" -- "$_bd_timeout" bd hooks run post-merge "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=0
if command -v timeout >/dev/null 2>&1; then
timeout "$_bd_timeout" bd hooks run post-merge "$@"
_bd_exit=$?
elif command -v gtimeout >/dev/null 2>&1; then
gtimeout "$_bd_timeout" bd hooks run post-merge "$@"
_bd_exit=$?
elif command -v perl >/dev/null 2>&1; then
_bd_timeout_backend=perl
if perl -e 'alarm shift; exec @ARGV' -- "$_bd_timeout" bd hooks run post-merge "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=1
perl -e 'alarm shift; exec @ARGV' "$_bd_timeout" bd hooks run post-merge "$@"
_bd_exit=$?
else
echo >&2 "beads: hook 'post-merge' running without timeout; install coreutils or perl to enable BEADS_HOOK_TIMEOUT"
if bd hooks run post-merge "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
bd hooks run post-merge "$@"
_bd_exit=$?
fi
if { [ "$_bd_timeout_backend" = coreutils ] && [ "$_bd_exit" -eq 124 ]; } || { [ "$_bd_timeout_backend" = perl ] && [ "$_bd_exit" -eq 142 ]; }; then
if [ $_bd_exit -eq 124 ] || { [ $_bd_used_perl -eq 1 ] && [ $_bd_exit -eq 142 ]; }; then
echo >&2 "beads: hook 'post-merge' timed out after ${_bd_timeout}s — continuing without beads"
_bd_exit=0
fi
if [ "$_bd_exit" -eq 3 ]; then
if [ $_bd_exit -eq 3 ]; then
echo >&2 "beads: database not initialized — skipping hook 'post-merge'"
_bd_exit=0
fi
if [ "$_bd_exit" -ne 0 ]; then exit "$_bd_exit"; fi
if [ $_bd_exit -ne 0 ]; then exit $_bd_exit; fi
fi
# --- END BEADS INTEGRATION v1.2.1 ---
# --- END BEADS INTEGRATION v1.2.2 ---
+17 -43
View File
@@ -1,59 +1,33 @@
#!/usr/bin/env sh
# --- BEGIN BEADS INTEGRATION v1.2.1 ---
# --- BEGIN BEADS INTEGRATION v1.2.2 ---
# This section is managed by beads. Do not remove these markers.
if command -v bd >/dev/null 2>&1; then
export BD_GIT_HOOK=1
_bd_timeout=${BEADS_HOOK_TIMEOUT:-300}
case "$_bd_timeout" in
*[!0-9]*|'') _bd_timeout_invalid=1 ;;
*[1-9]*) _bd_timeout_invalid=0 ;;
*) _bd_timeout_invalid=1 ;;
esac
if [ "$_bd_timeout_invalid" -eq 1 ]; then
echo >&2 "beads: invalid BEADS_HOOK_TIMEOUT; using 300 seconds"
_bd_timeout=300
fi
_bd_timeout_backend=none
_bd_timeout_command=
for _bd_timeout_candidate in timeout gtimeout; do
if command -v "$_bd_timeout_candidate" >/dev/null 2>&1; then
if _bd_timeout_version="$("$_bd_timeout_candidate" --version 2>/dev/null)"; then
case "$_bd_timeout_version" in
"timeout (GNU coreutils) "*) _bd_timeout_command=$_bd_timeout_candidate; break ;;
esac
fi
fi
done
if [ -n "$_bd_timeout_command" ]; then
_bd_timeout_backend=coreutils
if "$_bd_timeout_command" -- "$_bd_timeout" bd hooks run pre-commit "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=0
if command -v timeout >/dev/null 2>&1; then
timeout "$_bd_timeout" bd hooks run pre-commit "$@"
_bd_exit=$?
elif command -v gtimeout >/dev/null 2>&1; then
gtimeout "$_bd_timeout" bd hooks run pre-commit "$@"
_bd_exit=$?
elif command -v perl >/dev/null 2>&1; then
_bd_timeout_backend=perl
if perl -e 'alarm shift; exec @ARGV' -- "$_bd_timeout" bd hooks run pre-commit "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=1
perl -e 'alarm shift; exec @ARGV' "$_bd_timeout" bd hooks run pre-commit "$@"
_bd_exit=$?
else
echo >&2 "beads: hook 'pre-commit' running without timeout; install coreutils or perl to enable BEADS_HOOK_TIMEOUT"
if bd hooks run pre-commit "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
bd hooks run pre-commit "$@"
_bd_exit=$?
fi
if { [ "$_bd_timeout_backend" = coreutils ] && [ "$_bd_exit" -eq 124 ]; } || { [ "$_bd_timeout_backend" = perl ] && [ "$_bd_exit" -eq 142 ]; }; then
if [ $_bd_exit -eq 124 ] || { [ $_bd_used_perl -eq 1 ] && [ $_bd_exit -eq 142 ]; }; then
echo >&2 "beads: hook 'pre-commit' timed out after ${_bd_timeout}s — continuing without beads"
_bd_exit=0
fi
if [ "$_bd_exit" -eq 3 ]; then
if [ $_bd_exit -eq 3 ]; then
echo >&2 "beads: database not initialized — skipping hook 'pre-commit'"
_bd_exit=0
fi
if [ "$_bd_exit" -ne 0 ]; then exit "$_bd_exit"; fi
if [ $_bd_exit -ne 0 ]; then exit $_bd_exit; fi
fi
# --- END BEADS INTEGRATION v1.2.1 ---
# --- END BEADS INTEGRATION v1.2.2 ---
+17 -43
View File
@@ -1,59 +1,33 @@
#!/usr/bin/env sh
# --- BEGIN BEADS INTEGRATION v1.2.1 ---
# --- BEGIN BEADS INTEGRATION v1.2.2 ---
# This section is managed by beads. Do not remove these markers.
if command -v bd >/dev/null 2>&1; then
export BD_GIT_HOOK=1
_bd_timeout=${BEADS_HOOK_TIMEOUT:-300}
case "$_bd_timeout" in
*[!0-9]*|'') _bd_timeout_invalid=1 ;;
*[1-9]*) _bd_timeout_invalid=0 ;;
*) _bd_timeout_invalid=1 ;;
esac
if [ "$_bd_timeout_invalid" -eq 1 ]; then
echo >&2 "beads: invalid BEADS_HOOK_TIMEOUT; using 300 seconds"
_bd_timeout=300
fi
_bd_timeout_backend=none
_bd_timeout_command=
for _bd_timeout_candidate in timeout gtimeout; do
if command -v "$_bd_timeout_candidate" >/dev/null 2>&1; then
if _bd_timeout_version="$("$_bd_timeout_candidate" --version 2>/dev/null)"; then
case "$_bd_timeout_version" in
"timeout (GNU coreutils) "*) _bd_timeout_command=$_bd_timeout_candidate; break ;;
esac
fi
fi
done
if [ -n "$_bd_timeout_command" ]; then
_bd_timeout_backend=coreutils
if "$_bd_timeout_command" -- "$_bd_timeout" bd hooks run pre-push "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=0
if command -v timeout >/dev/null 2>&1; then
timeout "$_bd_timeout" bd hooks run pre-push "$@"
_bd_exit=$?
elif command -v gtimeout >/dev/null 2>&1; then
gtimeout "$_bd_timeout" bd hooks run pre-push "$@"
_bd_exit=$?
elif command -v perl >/dev/null 2>&1; then
_bd_timeout_backend=perl
if perl -e 'alarm shift; exec @ARGV' -- "$_bd_timeout" bd hooks run pre-push "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=1
perl -e 'alarm shift; exec @ARGV' "$_bd_timeout" bd hooks run pre-push "$@"
_bd_exit=$?
else
echo >&2 "beads: hook 'pre-push' running without timeout; install coreutils or perl to enable BEADS_HOOK_TIMEOUT"
if bd hooks run pre-push "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
bd hooks run pre-push "$@"
_bd_exit=$?
fi
if { [ "$_bd_timeout_backend" = coreutils ] && [ "$_bd_exit" -eq 124 ]; } || { [ "$_bd_timeout_backend" = perl ] && [ "$_bd_exit" -eq 142 ]; }; then
if [ $_bd_exit -eq 124 ] || { [ $_bd_used_perl -eq 1 ] && [ $_bd_exit -eq 142 ]; }; then
echo >&2 "beads: hook 'pre-push' timed out after ${_bd_timeout}s — continuing without beads"
_bd_exit=0
fi
if [ "$_bd_exit" -eq 3 ]; then
if [ $_bd_exit -eq 3 ]; then
echo >&2 "beads: database not initialized — skipping hook 'pre-push'"
_bd_exit=0
fi
if [ "$_bd_exit" -ne 0 ]; then exit "$_bd_exit"; fi
if [ $_bd_exit -ne 0 ]; then exit $_bd_exit; fi
fi
# --- END BEADS INTEGRATION v1.2.1 ---
# --- END BEADS INTEGRATION v1.2.2 ---
+17 -43
View File
@@ -1,59 +1,33 @@
#!/usr/bin/env sh
# --- BEGIN BEADS INTEGRATION v1.2.1 ---
# --- BEGIN BEADS INTEGRATION v1.2.2 ---
# This section is managed by beads. Do not remove these markers.
if command -v bd >/dev/null 2>&1; then
export BD_GIT_HOOK=1
_bd_timeout=${BEADS_HOOK_TIMEOUT:-300}
case "$_bd_timeout" in
*[!0-9]*|'') _bd_timeout_invalid=1 ;;
*[1-9]*) _bd_timeout_invalid=0 ;;
*) _bd_timeout_invalid=1 ;;
esac
if [ "$_bd_timeout_invalid" -eq 1 ]; then
echo >&2 "beads: invalid BEADS_HOOK_TIMEOUT; using 300 seconds"
_bd_timeout=300
fi
_bd_timeout_backend=none
_bd_timeout_command=
for _bd_timeout_candidate in timeout gtimeout; do
if command -v "$_bd_timeout_candidate" >/dev/null 2>&1; then
if _bd_timeout_version="$("$_bd_timeout_candidate" --version 2>/dev/null)"; then
case "$_bd_timeout_version" in
"timeout (GNU coreutils) "*) _bd_timeout_command=$_bd_timeout_candidate; break ;;
esac
fi
fi
done
if [ -n "$_bd_timeout_command" ]; then
_bd_timeout_backend=coreutils
if "$_bd_timeout_command" -- "$_bd_timeout" bd hooks run prepare-commit-msg "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=0
if command -v timeout >/dev/null 2>&1; then
timeout "$_bd_timeout" bd hooks run prepare-commit-msg "$@"
_bd_exit=$?
elif command -v gtimeout >/dev/null 2>&1; then
gtimeout "$_bd_timeout" bd hooks run prepare-commit-msg "$@"
_bd_exit=$?
elif command -v perl >/dev/null 2>&1; then
_bd_timeout_backend=perl
if perl -e 'alarm shift; exec @ARGV' -- "$_bd_timeout" bd hooks run prepare-commit-msg "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
_bd_used_perl=1
perl -e 'alarm shift; exec @ARGV' "$_bd_timeout" bd hooks run prepare-commit-msg "$@"
_bd_exit=$?
else
echo >&2 "beads: hook 'prepare-commit-msg' running without timeout; install coreutils or perl to enable BEADS_HOOK_TIMEOUT"
if bd hooks run prepare-commit-msg "$@"; then
_bd_exit=0
else
_bd_exit=$?
fi
bd hooks run prepare-commit-msg "$@"
_bd_exit=$?
fi
if { [ "$_bd_timeout_backend" = coreutils ] && [ "$_bd_exit" -eq 124 ]; } || { [ "$_bd_timeout_backend" = perl ] && [ "$_bd_exit" -eq 142 ]; }; then
if [ $_bd_exit -eq 124 ] || { [ $_bd_used_perl -eq 1 ] && [ $_bd_exit -eq 142 ]; }; then
echo >&2 "beads: hook 'prepare-commit-msg' timed out after ${_bd_timeout}s — continuing without beads"
_bd_exit=0
fi
if [ "$_bd_exit" -eq 3 ]; then
if [ $_bd_exit -eq 3 ]; then
echo >&2 "beads: database not initialized — skipping hook 'prepare-commit-msg'"
_bd_exit=0
fi
if [ "$_bd_exit" -ne 0 ]; then exit "$_bd_exit"; fi
if [ $_bd_exit -ne 0 ]; then exit $_bd_exit; fi
fi
# --- END BEADS INTEGRATION v1.2.1 ---
# --- END BEADS INTEGRATION v1.2.2 ---