The events table had no attempt column, so two attempts of the same task were
indistinguishable: a retried task's stage events interleaved into one timeline and
nothing could say which run produced a given result.
- events gains an `attempt` column through the existing presence-gated
migrateTasks loop rather than a version bump, so user_version stays 3 and an
existing archie.db is migrated in place. A legacy-database test builds the
pre-change schema and proves both that existing rows survive unattributed
(attempt = 0) and that a new value round-trips.
- Event.attempt = 11 and ReadTaskLogRequest.stage = 9 are field additions to
existing messages: no new RPC, no new table, and no change to any canonical error
message that crosses the state-store wire.
- Every task event the workflow engine emits now carries the attempt. Producers
that have no attempt yet (task_queued, binding_dispatch_failure) stay
unattributed rather than guessing one.
- Changed files are captured as a durable changes_captured event at commit and push
time, reusing the existing three-dot diff primitive: paths from FilePatches(),
counts from Stats(), base_sha recorded as the merge base actually diffed rather
than the base tip, a 200-file cap with totals kept complete. Consumption goes
through an unexported optional interface so workflow.Trees -- the yaegi capability
surface for interpreted stage plugins -- is not widened. A capture is also taken
once the pull request exists, so the capture can link it.
- The per-attempt configuration is captured as a durable config_captured event
carrying the non-secret config.TaskConfig, instead of a new table plus two new
state-store RPCs: events are already this system's per-attempt provenance stream,
so a table would have given one feature two provenance mechanisms. Redaction is
proven against canary secrets. Measured payload: 539 bytes typical, 2333 bytes at
20 models.
- Captures carry a schema marker and are refused unless their key set matches the
declared payload shape, so drift surfaces as "recorded but could not be read"
rather than as a capture of zeroes.
- Three read endpoints serve the attempt rail, the changed-file captures and a raw
debug view, mapping to UI-owned response types rather than dumping store types.
- The task-log read gains a stage filter, bound to the stage logger for that
stage's own lines; agent and tool output records no stage.
A task-scoped grant may already insert events on its own task, so this provenance
is exactly as trustworthy as the rest of that task's event stream. That limit is
documented rather than papered over.
Write built its own context.Background() for the handler call, which meant
any new caller with a context to offer could not hand it over. Taking the
caller's context is what the next commit's park-reason writer needs, and it
is what contextcheck requires of a daemon-side writer.
No behaviour change: the context is used for the handler's own attribute
extraction and never consulted for cancellation -- a park is recorded at
exactly the moment a run's context has been cancelled, so a cancelled
context must not suppress the entry.
The download sets its attachment headers before the read, because the body
streams straight from the reader and a log is unbounded input -- buffering it
to size the response would defeat the reason it streams. Nothing then cleared
those headers, so a 404 for an attempt with no log went out as
Content-Disposition: attachment; filename="task-1-attempt-0.log"
Content-Type: application/x-ndjson
A browser treats that as a download: the caller gets a .log file containing
the text "no log recorded for this attempt". A stale or direct download URL is
enough to trigger it. The 503 for a process with no reader had the same shape.
Both error paths now clear the attachment headers before writing, so the
response is an error rather than a file. The successful path is unchanged.
Red first: the existing test asserted the status only, which is how this
passed. It now asserts the headers are cleared on a 404 and on a 503.
The dashboard's attempt-log panel answered every read with "task logging is
optional and was not enabled for this run". That message was false: logging is
wired unconditionally in the daemon, and the log files exist. The dashboard
process simply had no reader -- composition left TaskLogs absent because no
contract carried it -- so the handler saw a nil registry and reported the
disabled shape, which the page rendered as a claim about configuration.
internal/logging now answers whether an attempt has a log at all: Tail sets
Result.Found, so "this attempt has no log" is a value rather than an empty
list indistinguishable from a read that never happened. Its registry gains
TaskLog (a decoded page) and TaskLogContent (the file verbatim, streamed,
because a log is unbounded input), and an absent reader reports
ErrTaskLogsUnavailable rather than an empty page -- a process that cannot read
logs must not implicate the attempt.
Those two answers travel the State Store contract as storecontract.TaskLogStore
(ReadTaskLog, StreamTaskLogContent) and are rehydrated on the client by
(Unavailable, canonical message), so archie-ui composes the reader from its own
store client instead of opening another process's files. The daemon's registry
is wired as the server-side reader in the State Store process only.
On top of that read, GET /api/tasks/{id}/logs/download serves the attempt's log
as a Content-Disposition attachment named task-<id>-attempt-<n>.log, and the
panel offers it. The JSON route keeps its shape and gains found, so the page
states the attempt has no log instead of blaming a setting.
Task log files stay owned by their directory's owner: archiving still removes a
task's log directory, and that removal is the daemon's, not the dashboard's.
IncrementRetryCount had zero production callers -- only tests and the
staterpc plumbing referenced it. taskactions.Service.applyRetry already
uses the atomic RetryTask exclusively, which increments retry_count and
requeues in one transaction.
Unlike ListCaptures/ListUndispatchedCaptures (kept as declared-unconsumed
compatibility surfaces because a rolling deploy could have an old
client/server pairing mid-flight), this repo has one production consumer
(see AGENTS.md's solo-project note), so the breaking removal is accepted
outright rather than deprecated-and-kept. Deleted the Go method, the
storecontract interface entry, the staterpc server/client methods, and the
RPC/messages from state.proto, regenerating the .pb.go/_grpc.pb.go pair.
Test fixtures that used IncrementRetryCount as a setup helper now drive
retry_count through the real path instead: queries_test.go bumps it via
direct SQL (same package, no contract to route through), and
api_tasks_actions_test.go now loops RetryTask+Transition, which exercises
production code instead of a deleted one.
handleTaskAction, the config and workflow write handlers all call
authorizeTaskMutation before mutating, but the binding and mapping
create/update/delete/approve handlers never did, leaving those dashboard
endpoints reachable by a cross-origin request with no CSRF header -
contradicting dynamic-curators.md's documented mutation contract.
GitHub #821 reported two dashboard behaviours degrading in the extracted UI
process because webui.Server.Cfg is nil there. Half of it was already closed:
03afd2e ("take configuration off the dashboard server", on main since
2026-09-12) moved the daemon's ConfigView renderer off webui.Server, gave
ConfigView a chat section carrying show_tool_calls, the operator name and a
channel flag, and pointed chatShowToolCalls and handleSetup at the projection.
The chat page and the checklist do read published values now.
The channel flag was still wrong. It was derived from telegram and the webhook
gateway only, while the daemon's own channel status manager lists three
front-ends and counts the inbound mail gateway as one. An email-only
deployment therefore read as configured on /api/channels and unconfigured on
the setup checklist at the same time, and the checklist told the operator to
connect a channel they already had.
Fix at the producer: config.ChatConfig gains FrontEnds, the single definition
of "this front-end is configured", enumerating telegram, email and the webhook
gateway. Both the published projection (ChannelConfigured) and the daemon's
channel descriptors (status.NewManager) now derive from it, so the two surfaces
cannot drift apart again. A front-end added to [chat] is counted by both or
neither. Whitespace-only values are not configured: an env var name of " "
resolves to nothing and " " cannot be listened on.
The setup checklist stays. It renders each step as a title, a detail and a done
mark with no control behind it, so it answers "what is this deployment
missing?" rather than promising to fix it; the process that cannot apply setup
never offered to. Removing it would delete the one surface that distinguishes a
fresh deployment from a finished one, and the values it reads already cross the
boundary in ConfigView at no cost to the daemon. The write path stays descoped
for Phase 3 (docs/prds/ui-service-boundary.md, /api/config (write) row): the
checklist reports configuration, it does not change it.
docs/prds/ui-service-boundary.md records that judgement and corrects the
"Real-process evidence" paragraph, which claimed the channel flag covered every
chat channel.
Task rows in a deployment configuring [[identities]] rendered no forge links.
ConfigView carried the default identity's forge alone, so resolveForge
(api_tasks.go) withheld the links entirely rather than pointing every row at
the wrong forge -- production behaviour since the UI process cutover
(archie-core-8cda.5.4), where the dashboard runs in a process with no
config.Holder. archie-core-ml30 then removed webui.forgeConfigForTask and its
test, which resolved a task's forge from config.Config and had no reachable
caller once the holder was gone.
Fix at the producer, not the renderer. ConfigView gains `identities`: each
configured identity's forge type and host, plus the repositories it owns. That
is the whole answer to "which forge owns this task", and it is a projection the
daemon already rebuilds and republishes on boot and on every reload, so nothing
new is needed on the publish side. Only coordinates and repository names cross
-- an identity's token is a secret reference and stays out, which the new test
asserts alongside the existing leak guard.
resolveForge ports the matching rules recovered from 5b91a3a's
forgeConfigForTask onto that projection: an exact identity name first, then
repository ownership, and an ambiguous repository -- two identities claiming the
same owner/name -- falling back to the default forge rather than inventing a
link. Two deliberate departures from the recovered shape: it indexes the
identity list once per request instead of rescanning config per task, since the
projection supplies repo slices it can key on directly; and a document that
reports multi-identity but carries no per-identity forges still withholds,
because that is what an older daemon published and guessing there is the
original bug. The recovered code's first-wins scan for a duplicated identity
name is preserved.
Tests: the projection's per-identity forges and their secret-freedom; the three
matching rules and both fallbacks through resolveForge; every row of a
multi-identity GET /api/tasks carrying the right forge's link; and the real
archie-ui binary driven over HTTP against a multi-identity projection, which
fails on the pre-fix resolver with three unlinked rows.
webui.Server declared Cfg *config.Holder with eight read sites, none of
which ran in the UI process: composition leaves it nil there. The field
survived because the daemon kept a webui.Server it never served, using it
to render the published ConfigView snapshot and to hold the readiness
probes (archie-core-ml30).
Split at the producer. LocalConfigView becomes webui.BuildConfigView, a
pure function over a ConfigViewInput the configuration owner assembles;
the DTO and its schema stay where the UI renders them. The daemon builds
that input from its own state (boot.configViewInput) and publishes the
result. Readiness reads the daemon's Holder, channel manager and chat
contract, and the registry it produces is a daemon field, not a field on
a server with no listener. Boot now owns one Holder instead of seeding a
second and replacing it in buildDaemon; operator retry caps read it too,
so they follow a reload rather than a boot-time snapshot.
Server loses Cfg, ConfigProvenance, LastReload, ConfigOverrides and
SetProvenance. The nil-guarded branches they fed went with them, each
checked first against what the UI process actually serves:
- chat.show_tool_calls and the /api/setup checklist were degraded, not
dead. ConfigView gains a chat section carrying show_tool_calls, the
operator name and whether a channel is configured, and both surfaces
read the projection. The end-to-end suite asserts the checklist renders
from the published snapshot.
- /api/logs takes its path as a process-local option. The history is on
the daemon's disk, so a dashboard elsewhere cannot read it by learning
the path; that route still needs a contract.
- handleChannels drops its config-derived fallback, superseded by the
status manager, which already carries the descriptions and detail.
- trustForwardedHeaders keeps only the process's own setting, which the
UI process already sets.
- resolveForge keeps the published-projection path it already had.
ConfigView.Editable moves to handleConfig, decided by whether this
process holds UpdateConfig. It describes the writer, not the document, so
the write contract (archie-core-j28m) makes the page editable by wiring
one field. The write handlers and their seams stay for it.
overlay.Store gains Keys: Snapshot nests dotted keys for decoding, so the
overridden-key list was publishing section names ("budgets") where the
dashboard marks and resets rows by stored key ("budgets.max_steps").
Multi-identity forge links move to archie-core-pv6t: forgeConfigForTask
resolved a task's forge from config.Config, had no reachable caller once
the holder was gone, and belongs in the projection rather than the
rendering package.
The in-process suite proved the composition; nothing proved the process.
This builds the real binary, points it at a State Store and a Gateway on
loopback gRPC through an operator-shaped config.toml, and drives it over
HTTP: the token exchange and its 401s, the embedded SPA, a chat stream
relayed frame by frame, an operator task action crossing to the Gateway
and refused without the CSRF header, unauthenticated capture intake, the
ratified degradations, readiness dropping when a dependency dies while
liveness holds, and a clean SIGTERM.
It found one regression, fixed here at the producer. Task rows lost their
forge links in the extracted process: taskURLs read config.Holder, which
is nil once the dashboard stops sharing the daemon's process, so every
click-through to the issue and the PR silently disappeared. The forge is
now resolved once per request from whichever source that process owns,
the daemon's configuration or the daemon's published projection.
A multi-identity deployment keeps no links rather than gaining wrong ones:
the projection carries the default identity alone, so it now says so and
the renderer withholds.
Completes the objective deletion gate for the UI Service
(archie-core-8cda.5.6): go list -deps ./cmd/archie-ui now links zero
banned packages -- no modernc.org/sqlite, no internal/store, gateway,
channels, memory, secret, agentexec, tools, skill, yaegiutil, curator,
or the workflow engine. The closure shrinks from 68 to 26 archie-core
packages. Each cut is a producer-side move; no consumer-side defensive
shims.
- Store contracts (TaskStore family, value types, sentinels) moved from
internal/store to internal/domain/storecontract -- the approved contract
location per state-store-contract rev. 2d, and NOT internal/contracts:
that tree is buf generate output and tools/proto.sh check deletes
hand-written files there. internal/store keeps aliases; sentinel
message strings are byte-identical and remain the wire contract.
- Chat contracts (ChatContract, sessions, turns, streaming, commands)
moved from internal/gateway to internal/domain/messaging; gateway keeps
aliases. ToolCallEvent rendering helpers become gateway functions
(methods cannot live on alias types).
- Task vocabulary (Task, statuses, mid-run Store, Definition) split into
internal/domain/workflow/task; the pipeline engine stays in package
workflow with aliases, so daemon-side callers are unchanged.
- overlay.DeniedKeys moved to internal/infrastructure/configuration:
webui referenced the constant and that dragged the overlay SQLite
store in.
- webui.Server's concrete runtime handles become webui-owned view
interfaces with daemon-side bootstrap adapters: channel lifecycle
(internal/channels/status), MemoryStatus, CuratorStatus, and a
SkillCatalog seam replacing the direct skill.DefaultRoots/CatalogRoots
calls. Each degrades to an empty page when unwired.
- config.SecretRef moved into internal/config (config vocabulary);
internal/secret keeps an alias and Registry.Resolve absorbs the
zero-value short-circuit.
Docs: state-store-contract rev. 2d relocation record; ui-service-boundary
deletion gate marked satisfied; ARCHITECTURE.md package map rows.
The deletion gate for the UI Service (archie-core-8cda.5.6) is objective:
go list -deps from cmd/archie-ui must show no SQL/store implementation.
internal/store's hand-written contract surfaces (TaskStore and its
component interfaces, CaptureStore, MappingStore, BindingStore,
BindingDispatcher, BindingTaskCreator, ConfigSnapshotStore) move to
internal/contracts/store/v1 (package storev1), alongside the value types
they carry (CapturedEvent, ConfigSnapshot, WorkflowStat, StageStat,
DayTokens) and the sentinel errors -- whose canonical message strings are
the wire contract and are byte-identical after the move.
internal/store keeps type aliases, so daemon-side callers (archied, the
daemon, staterpc's server side, taskactions) are unaffected. The
UI-facing packages switch to storev1 directly: webui, archieui,
captureintake, gatewayrpc, and staterpc's client/values -- which drops
internal/store and modernc.org/sqlite from the archie-ui binary's import
closure.
overlay.DeniedKeys moves to internal/infrastructure/configuration for the
same reason: webui referenced the constant and that dragged the overlay
package's SQLite store in.
The chat-contract and remaining runtime-handle decoupling continues under
the same bead.
- ui-service-boundary.md: the /api/captures|/mappings|/bindings row is
resolved by the cutover; archie-ui composes the store contracts and
mounts the captureintake receiver.
- event-capture-storage.md HTTP surface: the receiver mounts on the one
process serving the dashboard; work intake stays with the daemon.
- config.example.toml: [web].listen is the archie-ui process's bind
address; [capture] is projected by archie-ui.
- deployments: document running archie-ui alongside the other services
and add its systemd unit; capabilities comments updated for the
single-serving composition.
PRD gate 7 (docs/prds/ui-service-boundary.md): the daemon's in-process
webui.Run listener is deleted in the same change that wires the UI process,
so no fallback or second HTTP authority remains. The daemon's webui.Server
stays only as the configuration snapshot's renderer (archie-core-ymut): it
keeps the config Holder, provenance, reload status and the override list,
and drops the store surfaces, event broadcast, chat/task wiring that only
fed the listener. The bus drain becomes persistence-only -- the store is
the single fan-out point the UI process reads through its event pump.
The dashboard's configuration write path (PATCH /api/config, per-row reset,
per-repo field update) is deleted rather than left as dead policy: the
writes are descoped for the UI process (archie-core-ymut) and no route
reaches them. Editing is config.toml plus reload; the overlay store stays
for reload wiring.
At the cutover (archie-core-8cda.5.4) the UI process is the only listener
serving POST /webhooks/capture/{source}: the receiver is a persistence shim
over the State Store contract, and the daemon's binding-dispatch loop keeps
consuming captures from the same store, so the HTTP front door moves without
moving the owner of work intake. Zero [capture] options fall back to
configuration.DefaultCapture; the arrival announcement persists through
InsertEvent so the event pump delivers it, where the daemon's bus drain
persisted it before.
The dashboard's POST /webhooks/capture/{source} handler becomes
internal/infrastructure/captureintake.Receiver, mounted by the daemon on
the same bypass mux through webui.Server.CaptureIntake; the dashboard
keeps only the GET /api/captures read and the mapping preview's scan
window. The UI process now mounts no intake route at all instead of one
that answers 503 (archie-core-8cda.5.4).
The dashboard's Run read the watchdog's phase-2 report off local disk and
put it on the activity stream. That is a host-local file read in the process
that is moving off the host: the watchdog restarts archied and leaves its
verdict beside archied, so archied is what can read it.
The daemon now polls and relays it, publishing the same event through the
same bus, so it persists with every other event and reaches whichever
dashboard is watching. The event builder moves to releaseupdate, which owns
Report and its verification; the dashboard keeps only what it needs to tell
an installer where to write.
The startup poll stays: the watchdog writes its result only once the process
answers /healthz, so a single read at boot can always miss the report
describing that very boot.
persistAndBroadcastEvents takes the daemon context and detaches it for the
insert, which is what it always did with context.Background() -- the last
events of a run are the ones an operator reads afterwards.
The same dashboard is served by the daemon, which holds every runtime handle,
and by the UI process, which holds two remote contracts. A section with
nothing behind it still answers -- an empty list, a "disabled" marker, a 501 --
and the browser cannot tell that from a deployment where nothing has happened
yet. GET /api/capabilities says which sections this process can back, and the
nav drops the rest rather than offering a page that is permanently empty.
It fails open in both directions: an unreported section stays visible, and a
failed read hides nothing, because an entry that silently vanished is worse
than a page that explains itself.
Mappings and bindings move the other way. Both are ratified State Store
contracts carried by the client the UI process already holds, so leaving them
nil degraded two pages that have an owner; compose wires them.
A table test now enumerates every route whose capability is daemon-local and
pins what it answers without one (requirement 4 of archie-core-8cda.5.4):
task logs, the log feed and its stream, version and the update flow, channels
and reload, curators, memory, skills, workflows and work requests. Adding a
route with no owner now fails that test rather than the operator's browser.
The configuration page had exactly one source: this process's own
config.Holder. The UI process has no holder and is not permitted one, so the
page was empty there and the shared-holder assumption was the thing blocking
the cutover.
GET /api/config now reads a ConfigViewSource. The daemon builds the
projection from the configuration it owns, as before, and publishes that same
document to the State Store on boot and on every republish -- reload, a
dashboard edit, a repository field change -- since those are exactly the
moments it changes. The UI process renders what it reads there and nothing
else; an unknown schema is refused rather than half-rendered, and nothing
published yet is the documented empty response, not an error.
Editable is a property of the process, not of the configuration, so each
source sets it: the daemon holds the update path, the reader does not. The
settings page honours it, rendering values where it would otherwise offer
controls whose PATCH would answer 503 -- the deliberate feature reduction
archie-core-ymut recorded, made visible instead of discovered by clicking.
A failed publish is logged and degrades to a stale page. It must never fail
the reload or the edit that produced the configuration, both of which have
already taken effect.
The update watchdog verifies archied's restart, so archied has to be what
answers. It was probing the dashboard's /healthz, which belongs to the
dashboard: switch [web] off and nothing answers, and in the extracted UI
topology that endpoint reports a different process entirely, which would
confirm a release while the daemon it was meant to verify is down.
[health].listen (127.0.0.1:8485, defaulted, always on) serves /healthz,
/health and /health/detailed for the life of the process. Liveness answers
503 until the daemon reaches its run loop: the listener binds before the
subsystems do, so an unconditional 200 would tell the watchdog a half-booted
release came up. Failing to bind is fatal, because a daemon nothing can probe
gets every update rolled back. The State Store's readiness surface now shares
the listener plumbing, keeping its log and error text verbatim.
Closes archie-core-exbz, which asked which of two bad options to take when
the dashboard is off. Neither: the daemon owns its own liveness.
Also deletes TestInstallUpdateDetachesInstallerFromCallbackContext. It has
failed intermittently under load more than once, racing its fake bot server's
multipart parse against the cancellation it induces.
The dashboard composed its own taskactions.Service over whatever handles
happened to be set on webui.Server. In the extracted UI process those are
all nil, and each nil silently removes a guarantee: no Cfg means max_retries
stops being enforced, no Issues means a rejected task's forge issue stays
open and the poller re-enqueues it, no Events means operator actions never
reach the timeline, no TaskStopper means Stop cannot interrupt running work.
The handler now asks whoever owns task execution, through
ApplyOperatorTaskAction, and Issues/TaskStopper leave the dashboard entirely.
That path crosses two hops that both flatten errors, so the sentinels the
handler maps to 404/409/503 travel explicitly: a kind beside the message on
the NATS envelope, a gRPC code on the Gateway contract, each restored on
arrival. Without them a task that simply moved on reports as a broken daemon.
The action tests keep running the real service, now behind a local contract
the way the daemon serves it in production, so retry limits, forge closure,
events, archiving and log removal stay covered where they were.
The watchdog polled http://127.0.0.1:8420/healthz. Nothing binds 8420: the
daemon serves /healthz on [web].listen (127.0.0.1:8484 by default), so every
dashboard- or Telegram-initiated update waited out the 60s health timeout and
rolled back a release that had come up fine.
The daemon is the only process that knows which address it binds, so it now
derives the probe URL from its own config and hands it to the installer;
CommandInstaller exports ARCHIE_HEALTH_URL and the install script forwards it
into the watchdog unit, whose remaining default matches the dashboard's.
The suite never dialled the URL: every watchdog test faked curl as an
immediate failure, so only the unhealthy branch existed. One test now runs
the real curl against a real listener, and another pins the script default.
archie-core-za9f. The UI process owns no event bus, so after the .5.4 cutover
the activity feed would show history at page load and then go silent: live
delivery is a Server.Broadcast call made only from the daemon's bus
subscription.
Decided against the push-subscription RPC the bead assumed, on three findings:
* store.Open sets SetMaxOpenConns(1), so writes serialise and the event id is
assigned in commit order. The gap-skipping failure that normally rules out
polling an autoincrement cursor cannot happen here, and SSE catch-up already
depends on the same property.
* sseStream.drain treats a broadcast as a wakeup, not a payload: it fills the
persisted gap via catchUp and delivers the event only if catch-up missed it,
deduplicating on the since watermark. A poller substitutes for the bus with
no change to sse.go and no new SSE semantics.
* The events table is the only complete fan-out point. ArchiveTask writes an
audit event inside its transaction and daemon.go inserts binding-dispatch
failures directly, neither touching the bus. A push hub needs a hook at every
write site and misses any added later.
So: no proto change, no new auth surface, no backpressure policy. The pump
primes past existing history (a client's own catch-up serves that), then ticks
EventsSince into Broadcast. One pump serves every browser. A failed fetch
leaves the watermark intact, so a State Store restart costs latency, not
events.
Wired into archieui.Run in the background so priming a large events table
cannot delay the listener, with -event-poll-interval (default 1s).
Decision recorded in migration-decisions.md; ui-service-boundary.md's /events
route-owner row moves to RESOLVED, and /api/logs splits out of it as still
unresolved and host-local.
The UI Service serves task, capture, mapping and binding routes against a
*staterpc.Client, not a concrete *store.Store, but every existing webui test
fed a local store directly. Add remote coverage that stands up a real SQLite
store behind staterpc.RegisterServer, dials it, and asserts the handlers serve
over the wire. This surfaced two composition facts: the server Deps must wire
Captures/Mappings/Bindings/BindingDispatcher or those list endpoints fail
closed with err*Unavailable, and the timeline route's PathValue only resolves
through Server.Handler().
Log and health are asserted as deliberate degradation (log feed and health
registry are nil in a remote composition), matching the route inventory that
no State Store log/health contract exists.
Refs: archie-core-8cda.5.3
Replaced gateway.Message as the currency at the channel-facing boundary
with the canonical internal/domain/messaging.Message. Channel adapters
now build the record directly (RoleUser, ConversationID, Sender) and the
Router hands it back unchanged, so nothing converts between two shapes in
process. gateway.Message is deleted; the dashboard route that had no home
in the record lives in a new Inbound envelope (Message + transport-only
Page), which reaches the system prompt and is never persisted.
Role is now set at construction instead of derived at the store boundary,
and the assistant reply is a direct messaging.Message (RoleAssistant,
Sender=botUser). The gRPC proto is unchanged: pb.Message still carries no
role, and both sides keep deriving it from the owning session's bot
identity via gateway.RoleForSender (ToStoredMessage/FromStoredMessage are
deleted).
Adds tests that the old shape could not express: Page reaches the system
prompt but not the persisted record, and a channel-built Inbound round-trips
with the Role the channel set.
Refs: archie-core-9g5e
SessionStore message history now stores/loads domain/messaging.Message:
sender attribution, derived role, and conversation address are canonical
record fields. SQLite gains a role column with open-time backfill for
pre-migration databases. gateway.Message remains the channel-facing
transport; conversion lives in one boundary module. ChatContract,
gatewayrpc proto, and dashboard JSON are unchanged; the RPC client
splits into ChatContract (Client) and SessionStore (StoreClient) views.
Sessions stay SessionContext: UUID keys and platform/bot/title/branch
metadata have no lossless home in Conversation; keyed migration tracked
separately once Agent/user/binding ownership settles.
Refs: archie-core-d9dv
* feat(state-store): generalize storerpc as the State Store gRPC contract
Implements archie-core-8cda.4.2 against docs/prds/state-store-contract.md
rev. 2c: generate protobuf/gRPC client and server adapters for every
ratified store contract (proto/state/v1/state.proto, 40 RPCs, one
StateStoreService), add internal/infrastructure/staterpc with a bufconn
conformance suite exercising both local and remote adapters, serve the
service in-process (bridge address + mandatory per-task bearer token when
agent containers exist, loopback-only otherwise), and flip archie-agent's
workflow.Store to a long-lived gRPC client when the daemon injects
STATE_STORE_URL/STATE_STORE_TOKEN (falling back to the legacy NATS
storerpc path otherwise -- one agent process is never both).
Also drops the *sql.Tx parameter from store.BindingDispatcher.RecordDispatch
(a required wire-blocker fix: a transaction cannot cross a gRPC boundary,
and production always passed nil).
fix(store): drop RecordDispatch's unusable *sql.Tx parameter
feat(config): add services.state contract-adapter selector
* fix(state-store): apply no-mistakes review decisions
- Drop StreamTokenInterceptor (unused; the State Store service has no
streaming RPCs and nothing calls it).
- Make StateStoreTokens.Validate compare tokens in constant time
(crypto/subtle) per the auto-fix hardening.ing finding.
- Amend config.example.toml / config.Services.State doc text so it frames
[services.state].target as the ratified surface consumed by the upcoming
standalone archie-state-store binary (.4.3), not active today.
* refactor(workflow,store): relocate Task/Status/Source and define workflow.Store
Move store.Task, store.Status*/store.Source*, and the 3-method workflow
store interface out of internal/store into internal/domain/workflow as
workflow.Task/workflow.Status/workflow.Source plus a consumer-owned
workflow.Store, superseding store.WorkflowStore. internal/domain/workflow
now imports zero internal/store symbols; internal/store persists the
domain type instead (infrastructure depends on domain), and its Store
satisfies workflow.Store.
Updates every production and test caller of the relocated symbols across
daemon, webui, gateway, agentworker, agenttransport/nats, storerpc,
taskrun, and worktreerpc, and removes TestRecordDispatchViaExplicitTx per
docs/prds/state-store-contract.md (rev. 2c) sections 4 and 12 step 2.
Two workflow-package integration tests that exercise the real *store.Store
move to an external workflow_test package (store_integration_test.go) to
avoid a workflow(test)->store->workflow(prod) import cycle now that store
depends on workflow.
* no-mistakes(document): docs(state-store): mark §4.8 relocation done in state-store-contract
Phase 1 (extract the Gateway Service), first stage. Repairs the
half-migrated working tree so the default (inproc) daemon path works
again while keeping the WIP's direction:
- chatTaskActorAdapter is contract-only (no HTTP detour); nil contract
returns ErrChatCapabilityUnavailable instead of panicking.
- openStores opens the conversation store for both processes again;
the standalone gateway no longer owns it exclusively. Phase 1 keeps
the daemon's Telegram/email routers and session-memory curator
reading the same SQLite file; remote conversations arrive when a
process that cannot open the file needs them.
- setupLLMAndChat composes the local gateway (setupGatewayChat) in
default mode and a remote gRPC client in mode=remote; the returned
contract is never nil, and Run handles the error.
- taskactions.Service is now the single task-mutation implementation
shared by the dashboard (webui TaskActionService), the daemon's local
gateway actor, and the NATS responder. The daemon registers
taskactions.Register so the standalone Gateway's client can forward
actions; transport follows the repo's natsrpc pattern.
- uncommitted sessions.proto / SessionStoreService gRPC contract
deferred: it has no wired consumers (scope creep for this stage).
- task_action_adapter_test.go rewritten against the contract chain.
task check passes; archied and archie-gateway both build.
* feat(webui): add /health and /health/detailed readiness endpoints (archie-core-1786637496789-265-b052b772)
Implements the Operations: readiness probes bead from the hermes gap analysis
(docs/prds/hermes-gap-analysis.md sections 9-10).
- GET /health: liveness, no auth, always 200 ok.
- GET /health/detailed: authenticated (dashboard token), JSON report with
overall ok/degraded status plus per-subsystem probe results.
New readiness probes, each reporting real current state:
- state_db: read-only StatusCounts against the store.
- config: configuration.Validate against the running config.
- disk: statfs, degraded above 90% used.
- model: active model configured + provider endpoint reachable.
- gateway: channel running/failed state + connected session count.
Layering: probe contract in internal/domain/health, implementations in
internal/infrastructure/readiness, wiring in internal/app/archied,
HTTP surface in internal/webui.
* no-mistakes(document): docs(archied): fix stale doc pointer in readiness probe comment
Real bug found via browser-testing the new bindings UI (t2db.8):
UpdateBinding's own store-layer contract documents that an empty
Secret means "preserve the existing one" (COALESCE against NULLIF),
but handleBindingUpdate validated with the create-time Validate(),
which unconditionally requires a full-length secret -- rejecting the
exact "leave blank to keep it" edit flow the store was built to allow.
Root-cause fix, not a UI workaround: Binding.Validate() (create,
unchanged, still requires a real secret -- there's nothing to fall
back to on insert) now delegates shared field checks to a private
validateCommon(); a new ValidateForUpdate() reuses the same checks but
only enforces the secret-length floor when the caller actually
supplied a new one. handleBindingUpdate now calls ValidateForUpdate.
3 new domain tests + 1 new API-layer test pin: empty secret accepted
on update, a genuinely-short new secret still rejected on update,
empty secret still rejected on create.
Root-cause fix for the correctness gap named in archie-core-t2db.8:
resolveBindingRepo refused to dispatch with zero or multiple configured
repos, meaning a multi-repo deployment could never use bindings at all.
- binding.Binding gains optional Owner/Repo fields; Validate rejects
setting only one (a pin is a complete pair or not a pin at all).
- Persisted as new owner/repo columns (NOT NULL DEFAULT '', additive --
no migration needed since bindings is a CREATE TABLE IF NOT EXISTS
with no existing deployment yet).
- resolveBindingRepo now takes the binding: a pinned binding dispatches
to its own owner/repo unconditionally; an unpinned binding keeps
today's single-configured-repo fallback (0 or 2+ repos still refuses,
unchanged -- verified by a dedicated regression test, not just
assumed preserved).
- Wired through the API request/response shape (create/update accept
and return owner/repo); no repo-existence validation against config
added -- smallest workable change, not the named bug.
Red-green throughout: 8 new tests across domain/store/daemon/webui
layers, each proven to fail before the corresponding implementation
step. Zero regressions in existing binding/dispatch test suites.
Dashboard UI to expose this (the other half of t2db.8) is unstarted --
this closes the backend correctness gap only.
Implements archie-core-t2db.4: the runtime-editable binding entity that
turns a captured webhook into an archie task, plus the per-source HMAC
verification at handleCapture that makes t2db.5's 'unauthenticated event
cannot trigger a binding' invariant structurally enforceable.
Captures, mappings and bindings are now separate concerns on the same
single *store.Store; the new BindingStore / BindingDispatcher /
BindingTaskCreator split keeps each interface under the interfacebloat
limit (8 methods).
State machine: draft -> pending_approval -> armed; any edit on an armed
binding drops it back to pending_approval, enforced in SQL via
status='pending_approval' on UPDATE so the rule cannot be bypassed by a
direct status field in the request body. Approve is the only sanctioned
transition into armed (WHERE status='pending_approval' guard).
Overlap: two bindings may not share a source in any status; enforced at
InsertBinding and UpdateBinding (transaction-local SELECT). Approve has
a separate TOCTOU guard so a race between Insert and Approve cannot
// bypass the check.
HMAC at handleCapture: reads X-Hub-Signature-256 (then X-Signature-256)
// fallback, verifies via webhookguard.VerifyHMAC against the binding's
// per-source secret, marks CapturedEvent.Authenticated=true on match.
// Captures with no armed binding, missing signature, or wrong signature
all persist as authenticated=false -- the dispatch loop's
binding.Matcher.Matches gate (requires authenticated) is what stops
them from spawning a task. Two armed bindings for one source returns
409 at capture time as a belt-and-braces TOCTOU guard.
Dispatch loop: added Daemon.dispatchBindings, called from both Cycle
and maintainAndDrain between poll and drain. Walks
captured_events where authenticated=1 AND source IN armed bindings
AND id NOT IN binding_dispatches, runs the binding's matcher, resolves
the mapping, enqueues a chat-style task with binding_id /
// binding_version provenance stamped in the same transaction as the
// row insert. The binding_dispatches ledger (composite PK on
(binding_id, capture_id)) is the at-most-once guarantee across cycles
// and daemon restarts.
Tasks schema migration: binding_id INTEGER NOT NULL DEFAULT 0 +
binding_version INTEGER NOT NULL DEFAULT 0 (taskSchemaVersion bumped
1 -> 2). Existing tasks keep 0 / 0.
Out of scope (documented follow-ups):
- secret encryption at rest (plaintext today)
- full dashboard HTML for the binding editor (CRUD API only this bead)
- per-binding rate limits (existing per-remote-address limit applies)
- binding.Owner / binding.Repo fields (dispatch falls back to the
single configured repo; multi-repo deployments log and skip)
Adds PATCH /api/config/repos/{owner}/{name}, a dedicated seam distinct
from the generic dotted-key PATCH /api/config path: a repository is
one element of []config.Repo, not a flat key. Traced the mechanism
before adding any new plumbing -- overlay.Nest/ApplyOverlayValues
already handle "repos" as a single whole-slice key with no dot, so
the fix is a webui handler plus a bootstrap seam that reads the
daemon's live, untrimmed Repos (never webui.RepoView, which omits
Preflight/TestGlob), mutates the one matched field via the pure
applyRepoFieldUpdate helper, and republishes through the existing
UpdateConfig(ctx, {"repos": repos}) path unchanged.
config-row.js's row() gains an opts.save override so an edit can be
redirected to a different persistence call. The repositories table
renders an autosaving checkbox for the two booleans and a
save-on-blur/Enter input for max_retries, via api.configRepoUpdate.
Closes archie-core-b6ew.6, and with it archie-core-b6ew.
TestConfigFieldDescriptorsRestartRequiredIsDeliberate pins the exact
RestartRequired value per field against the reload.go evidence
already documented in configFieldDescriptors' own comment, so a field
reclassified without re-checking reload.go fails loudly instead of
silently defaulting to "takes effect immediately."
ui/test/settings-schema.test.js renders settingsPage against a schema
fixture containing a field settings.js was never written to know
about, proving the renderer needs no field-specific branch to show it
correctly, and asserts by reading settings.js's own source that none
of the generically-rendered fields' keys appear literally in it --
the direct regression test for archie-core-b6ew.3.
The rest of this issue's scope (metadata completeness, structured/
locked non-editability, schema secret-leak guard) was already covered
incrementally while implementing archie-core-b6ew.1 through .4.
Closes archie-core-b6ew.5
RepoView.ReviewEnabled was previously absent from GET /api/config
entirely, not just unrendered; add it alongside AllowConcurrent and
MaxRetries. The repositories table gains Concurrent/Max retries/
Self-review columns as read-only pills -- this is the concrete
discoverability fix for "why isn't a second agent running": that
config was already reachable from the API, just never shown.
config.example.toml documents review_enabled, which had no example
entry before this.
Full inline editing of per-repo fields is out of scope here: the
dashboard's PATCH /api/config path has no array-index support for
updating one element of the Repos slice, which is separate,
real scope -- filed as archie-core-b6ew.6.
Closes archie-core-b6ew.4
settings.js drops identityCard/budgetsCard/storageCard/webCard/
pullPolicyLabel in favour of one schemaCards() that walks cfg.schema
and builds a card per section, a row per non-structured field --
label, type, description, editability and enum options all come from
the backend descriptor instead of a hardcoded row(...) call per key.
config-row.js gains: enum fields edit as a <select> from opts.options;
opts.editable === false renders read-only distinct from a locked row
(no reason to show, just no edit affordance); opts.hint carries a
field's description as the label's tooltip, so "0 means unlimited."
travels with the field instead of being baked into a display-value
string per key.
ConfigSection also gains Description, filled in per section to match
each card's existing sub-text, since the card's own explanation is
schema metadata too.
Structured sections (repositories, models & providers) are untouched
-- still the existing bespoke renderers, reserved for archie-core-b6ew.4.
Closes archie-core-b6ew.3
ConfigView.Schema carries the archie-core-b6ew.1 descriptor catalog
with each request's own values, locked reasons, and overridden
markers attached (buildConfigSchema), additive alongside the existing
flat fields so nothing that reads ConfigView today breaks.
Tests confirm schema values match their flat-field source of truth,
locked reasons propagate to the schema entry, structured fields stay
non-editable, and secrets never reach the schema block.
Closes archie-core-b6ew.2
Introduces ConfigField/ConfigSection and configFieldDescriptors(),
attaching key/label/type/editable/restart-required to every field
GET /api/config already exposes -- the data-independent half of the
schema contract from docs/prds/config-schema.md. RestartRequired is
sourced from reload.go's reloadableFields/reloadableSubFields
allowlist rather than guessed.
Not wired into the API response yet (archie-core-b6ew.2); this issue
is the catalog and its contract tests only.
Closes archie-core-b6ew.1
"Treat this as UNCONFIRMED, not complete" is developer-speak in a
message an operator with no codebase context has to act on. Reword to
plain instruction: say what's known, then what to do about it.
-X main.gatewayVersion/main.runtimeVersion targeted package main, but
those vars live in internal/app/archied (cmd/archied is a thin
wrapper). An -X target that doesn't exist is silently ignored by the
linker, so every archied binary this shipped -- task build, install.sh,
Dockerfile.archied, and the carina self-update script -- reported
"dev" instead of its real version. Point every one of those ldflags at
the actual package.
Also, while chasing the carina incident this surfaced:
- restart.go: /restart didn't check for an in-flight /update install.
The install runs as archied's own child process, so a restart killed
it mid-build (observed: "signal: terminated") instead of letting it
finish or fail cleanly. Refuse the restart while updateInProgress.
- update.go / update_report.go: the "no version could be confirmed
running" branch still opened with "Update complete", contradicting
its own next clause. Reworded so an unverified outcome isn't
reported as completion.
- mcp client_test: assert both initialize handshake calls happened and
notifications/initialized has an empty ID, not their exact order
- telegram model_test: assert the resolved model has an openrouter/
prefix instead of scanning button text for the string; replace the
single-hardcoded-count pagination test with cases covering 0/1/8/9/100
models so pageBounds and nav-row logic are actually exercised
- webui api_chat_test: assert the actionable file path is present in the
streamed error instead of matching generic wording